THEORETICAL FEATURES OF THE PROCESS CLEANING ZONE BETWEEN SECTIONS OF RAW COTTON FROM WEED IMPURITIES
Abstract
The article proposes to use the Euler equations to describe the motion of a stationary stream in the cleaning zones, which allows us to determine the laws of the distribution of pressure, density and speed along the arc of contact of the moving layer of raw cotton with the surface of the mesh during impact with spikes on the pulp. It was found that the pressure, density and flow velocity along the cleaning arc as a result of the hammer spikes change stepwise with decreasing pressure and density and increasing flow velocity along this arc.
References
1. Study of the effect on the natural characteristics of fiber in the process of application of cotton processing technology. International journal of innovations in engineering research and technology [ijiert], // USA dec.-2020, volume 7, issue 12, pag 111-116. Sh. Isayev. Y.Ergashev N.M.Oripov I. Xakimov
2. Modeling the process of separation of small contaminants into the stream of raw cotton moving in the area of treatment. International Journal of Advanced Research in Science, Engineering and Technology, // USA December 2018 Vol. 5, Issue 12, pag 7481-7487. Sh. Isayev. E.Gaibnazarov M.Xojiyev F.Sirojiddinov
3. Sarimsaqov, O., Obilov, B., Isayev, S., Muhsinov, I., Muhiddinov, S., & Inamova, M. (2023, June). Theoretical study of the process of contaminants from raw cotton moving on the surface of the grate. In AIP Conference Proceedings (Vol. 2789, No. 1). AIP Publishing.
4. Muhsinov, I., Sarimsaqov, O., & Egamov, S. MEXANIK YUKLANISH TA’SIRIDA TEBRANUVCHI TO ‘RLI YUZADAGI KICHIK TEBRANISHLARINING TAHLILI. In The X International Scientific and Practical Conference" Trends and prospects for the development of modern education", November 20-22, 2023, Munich, Germany. 422p. (p. 361).
5. E G‘aybnazarov, I. I. (2020). Muxsinov “Theoretıcal Analysıs of the Movement of Raw Cotton ın Unıform Feeder Feed ın the New Installatıon” International Journal of Advanced Science and Technology Vol. 29.
6. Isaev, S., Inamova, M., & Muxsinov, I. (2023). Paxta chigitini laboratoriya sharoitida analizlar taxlili. Talqin va tadqiqotlar, 1(21).
7. Inamova, M., Rejabboyev, S., & Abduqodirov, K. (2024). SAW BLADE DENSITY, SPEED AND COMPOSITION FROM CHANGES IN THE SPEED OF THE SAW CYLINDER IN A SAWING MACHINE. Science and innovation, 3(A9), 97-100.
8. Isayev, S., Mamadaliyev, M., Muxsinov, I., Maftuna, I., & Sohibjon, E. (2023). Practical and theoretical analysis of the results obtained in the process of cleaning cotton from impurities. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 8(2), 67-73.
9. Yo'ldashev Xasanboy Sulaymon O'g'li, Inamova Maftuna Dedamirza Qizi, Mahmudova Yulduzxon Qutbiddin qizi, & Sarimsakov Olimjon Sharipjanovich. (2023). Arra tishlaridan paxta tolasini echib olish jarayoni parametrlarini asoslash. JOURNAL OF UNIVERSAL SCIENCE RESEARCH, 1(11), 665–671. https://doi.org/10.5281/zenodo.10250904
10. Rahimov, F., Rajapova, N., & Salomova, M. (2019). R. Muradov Create a Device that can Remove Heavy Components from the Chassis Chamber. International Journal Advanced Research Science, Engineering and Technology//Of ijarset, 6(7), 2350-0328.
11. Саломова, М., Рахимов, Ф., & Қосимов, Х. (1992). Пневмотранспорт қурилмаси элементларини такомиллаштириш. Механика муаммолари. 2019й, 101-104.
12. Якубов, И. (2021). Саломова Машхура, Маматқулов Орифжон. Чигит шикастланишини камайтириш мақсадида сепаратор конструкциясини такомиллаштириш//Халқаро илмий-амалий конференсия материаллари тўплами, 11(23), p647-649.
13. Nodirbek, M., Shukhratjon, K., Mashkhura, S., & Akmal, U. (2024). STUDY OF THE DISTRIBUTION PROCESS IN PIPES IN THE DIFFERENT AIR FLOW TRANSMISSION ZONE. Universum: технические науки, 9(4 (121)), 47-49.
14. Nazhmitdinov, S. A., & Abdulkhafizov, N. (2023). ЭКСПЕРИМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ ВАРИАНТОВ ПРОФИЛЕЙ КОЛОСНИКОВЫХ РЕШЕТОК НА ЭКСПЕРИМЕНТАЛЬНОЙ УСТАНОВКЕ МОДУЛЯ КРУПНОГО СОРА. Journal of Science and Innovative Development, 6(3), 99–105. https://doi.org/10.36522/2181-9637-2023-3-10
15. Najmitdinov Shuxrat Abdukarimovich, Yuldashev Khasanboy Sulayman o'g'li, & Sharipov Xayrullo No'monjanovich. (2023). Тола ажратиш жараёнида хомашё валиги зичлиги ва тезлигининг аҳамияти ўрганиш ва таққослаш. TECHNICAL SCIENCE RESEARCH IN UZBEKISTAN, 1(5), 250–256. https://doi.org/10.5281/zenodo.10416875
16. Sharipjanovich, S. O., O’gli, Y. X. S., Numonjonovich, S. X., & Rustamjonovich, M. S. (2022, May 12). INVESTIGATION OF SEPARATION OF USABLE FIBERS ADDED TO CONTAMINANTS DURING CLEANING COTTON. https://bestpublication.org/index.php/ozf/article/view/256
17. Yo‘Ldashev Hasanboy Sulaymon O‘G‘Li, Inamova Maftuna Dedamirza Qizi, & Sarimsakov Olimjon Sharifjanovich (2023). Arra tishlaridan paxta tolasini yechib olish jarayoni parametrlarini ilmiy asoslash. Илм-фан ва инновацион ривожланиш / Наука и инновационное развитие, 6 (6), 84-95. doi: 10.36522/2181-9637-2023-6-9
18. Arra tishlaridan paxta tolasini ilib olish jarayonini matematik modelini ishlab chiqish. (2023). International Conference on Multidisciplinary Science, 1(5), 174-177. https://mjstjournal.com/index.php/icms/article/view/381
19. Sulaymonov Abror, Inamove Maftuna, Yuldashev Khasanboy. (2022). THEORETICAL STUDIES OF THE NATURE OF THE INTERACTION OF COTTON SEEDS IN THE GAP BETWEEN THE AGITATOR BLADE AND THE SAW CYLINDER. EURASIAN JOURNAL OF ACADEMIC RESEARCH, 2(11), 666–672. https://doi.org/10.5281/zenodo.7218857
20. Yuldashev, K., Sharipov, K., Najmitdinov, S., Inamova, M., & Ruzimatov, S. (2024). Modelling Cotton Fiber Doffing From Saw Teeth Based On A Mathematical Model. E3S Web of Conferences, 537, 08017. https://doi.org/10.1051/e3sconf/202453708017
21. Khasanboy, Y., Inamova, M., Qobilov, M., & Abduxaliqov, A. (2021, November 17). Effect Of Moisture Contenent In The Process Of Storing, Drying And Cleaning The Seed Cotton. https://www.orientalpublication.com/index.php/iscrc/article/view/189
22. Khasanboy, Y., Abduraximov, K., Inamova, M., & Mirgulshanov, K. (2021, November 17). Study Of The Process Of Cleaning Seedcotton. https://orientalpublication.com/index.php/iscrc/article/view/191
23. Azimov, S. S., Tursunov, I. T., & Yuldashev, K. S. (2022). DEVELOPMENT OF THE DESIGN OF A FEEDER OF VIBRATION ACTION FOR SUPPLYING COTTON SEEDS TO LINTER MACHINES Proceeding IX International Conference «Industrial Technologies and Engineering» ICITE–2022, Volume IV M. Auezov South Kazakhstan University, Shymkent, Kazakhstan December, 09-10.
24. Olimjon Sarimsakov, Khasanboy Yuldashev, Sherzod Tuxtaev, Bekzod Urinboyev, Utkirbek Xoshimov; Methodology for performing aerodynamic measurements in cleaning seed cotton. AIP Conf. Proc. 23 June 2023; 2789 (1): 040128. https://doi.org/10.1063/5.0145700
25. Yuldashev, K., Sarimsakov, Prof., & Kayumov, Prof. (2023, December 27). Increasing the efficiency of fiber cleaning by improving the process of removing cotton fiber from the teeth of the saw. https://mjstjournal.com/index.php/mjst/article/view/585. https://mjstjournal.com/index.php/mjst/article/view/585
26. Madumarov , S. ., Jurayev , Y. ., & Yuldashev, K. . (2022). GENERAL INFORMATION ON THE IMPORTANCE OF FEEDSTOCK DENSITY AND SPEED IN THE FIBER SEPARATION PROCESS. Академические исследования в современной науке, 1(16), 57–61. извлечено от https://www.econferences.ru/index.php/arims/article/view/1485
27. Jurayev , Y. ., Yuldashev , K. ., & Tuhktaev , S. . (2022). INVESTIGATION OF FIBER LOSS IN IMPURITIES FROM THE SS-15A SEPARATOR. Евразийский журнал академических исследований, 2(11), 425–431. извлечено от https://www.in-academy.uz/index.php/ejar/article/view/4776
28. Sarimsakov Olimjon Sharipjanovich, Kurbanov Dilmurod Maripjanovich, Yo'ldashev Xasanboy Sulaymon O'gli, & Jurayev Yo'ldashxon Yunusxon O'g'li. (2022). INVESTIGATION OF LOSING FIBER DURING CLEANING COTTON. https://doi.org/10.5281/zenodo.6559924
29. Yo‘Ldashev Xasanboy Sulaymon O‘G‘Li, Sarimsakov Olimjon Sharifjanovich, Ergashev Sharibboy To‘Lanovich, & Sharipov Xayrullo No‘Monjanovich (2024). PAXTA TOLASINI ARRALI TOLA AJRATGICH ARRASI TISHLARIDAN YECHIB OLISH JARAYONINI TAKOMILLASHTIRISH YO‘LI BILAN TOLANI TOZALASH SAMARADORLIGINI OSHIRISH HAMDA ASOSLASH. Механика и технология, 2 (15), 160-164.
30. Yo‘Ldashev Xasanboy Sulaymon O‘G‘Li, Sarimsakov Olimjon Sharifjanovich, & Ergashev Sharibboy Tulanovich (2024). PAXTA TOLASI BILAN HAVO ARALASHMASI OQIMI HARAKATINI MODELLASHTIRISH. Al-Farg’oniy avlodlari, (3), 139-144. doi: 10.5281/zenodo.13954931
31. Yo'ldashev Xasanboy Sulaymon O'g'li, Inamova Maftuna Dedamirza Qizi, Mahmudova Yulduzxon Qutbiddin qizi, & Sarimsakov Olimjon Sharipjanovich. (2023). Arra tishlaridan paxta tolasini echib olish jarayoni parametrlarini asoslash. JOURNAL OF UNIVERSAL SCIENCE RESEARCH, 1(11), 665–671. https://doi.org/10.5281/zenodo.10250904
32. Arra tishlaridan paxta tolasini ilib olish jarayonini matematik modelini ishlab chiqish. (2023). International Conference on Multidisciplinary Science, 1(5), 174-177. http://mjstjournal.com/index.php/icms/article/view/381
33. Tuychiev, T., Turdiyev, H., Ruzmetov, R., Gapparova, M., & Sharipov, K. (2024). Research on An Improved and Set Spiked Cylinder 6A-12M1. BIO Web of Conferences, 139, 03002. https://doi.org/10.1051/bioconf/202413903002
34. Ахмедходжаев, К. Т., Таджибаев, М. А., Шарипов, К. Н. М., Джурамирза, А. К., и Абдураксимов, К. К. (2023). Изучение семян хлопчатника как технологического материала. Машиностроение, 15(11), 782-791.
35. Шарипов К., Ахмедходжаев К., Тоджибоев М., Саримсаков О. (2020) Математическая модель движения семян на ребре вогнутого профиля. Машиностроение, 12, 216-227. https://doi.org/10.4236/eng.2020.123017
36. Sharipov, K., Akhmetxodjayev, K., & Tadjibayev, M. (2019). The mathematical model of seed movement on a concave profile rib of saw jin stand. Scientific and technical journal of Namangan institute of engineering and technology, 4, 19-29.
